HIGHWHEEL LONGLINE FLAT PULLEY
Tax excluded. Shipping calculated at checkout
Flat Pulley with ball bearings
The HIGHWHEEL is an aluminum pulley with a 1 inch (2.5cm) roller base that slides on two steel ball bearings to ensure smooth movement.
The special aluminum roller prevents jamming between the webbing and the bearings. The roller is completely smooth and leaves no marks on the webbing when sliding.
The side plates swivel open to accommodate all slackline webbing from 0.9-1.02in (24-26mm) width.
The rounded shape of the HIGHWHEEL
The shape of the HIGHWHEEL is optimised to maximise strength and reduce weight to only 91g.
The plate holes are compatible with all types of carabiners.
Tensioning assistant
The HIGHWHEEL pulley is an excellent addition when tensioning a slackline using the Primitive self-locking system. Friction is minimised and the efficiency is maximised by the smooth bearings of the HIGHWHEEL when used as a multiplier.
The side surface of the plates are extremely smooth so they do not to damage the edges of the slackline.
Using the HIGHWHEEL with a SCREW GATE carabiner?
If you want to use the HIGHWHEEL as a transport/slider carabiner, we recommend the purchase of the screw gate carabiner.
Warnings
The HIGHWHEEL is a connector that is not certified as PPE for use at heights above 1m. If you use HIGHWHEEL as a rolling device on webbing, always use in combination with a different fall arrest safety rope for the person.
Read the instruction manual carefully and follow the instructions for intended use.
| EAN13 | 7325999090 |